User's Manual

PC Connections

How to Use as PC

PC Connections

Connection

Connect PDP Monitor's RGB terminal to PC's RGB terminal using the D-Sub cable.

Connect PDP Monitor's PC Audio terminal to PC's Audio terminal using the Audio cable.

(Only possible for PC's with Audio terminal)

If there is a DVI- D terminal in your PC, use the HDMI to DVI cable connection.

1. Turn on the PDP Monitor and press on the remote controller.

2. Use to move to "PC".

If HDMI has been connected, select "HDMI".

3. Set the PC video output mode to VGA (640

480)/ SVGA (800 600)/ XGA (1024 768), SXGA (1280

1024, 60Hz). In the mode higher than SXGA (1280 1024, 60Hz) "Out of Range" message appears. Be

sure to change your PC video format to less than SXGA mode.

< PDP Monitor Back view >

< PC >

Connection terminals of other appliances differ by manufacture and model.

HDMI to DVI Cable

Audio Cable

D-SUB Cable