User's Manual

25
Basic Use
Prior to using the PDP Monitor.
Insert the power plug.
Connect external equipment properly.
Please use only after carefully reading this manual.
Check the power connection to the AC outlet and the connection of AC input to the PDP Monitor.
CAUTION - After unplugging the power cord, please wait at least more than 3 seconds to connect
the power cord back on.
Power on/ off
To turn the PDP Monitor on :
Press the "Standby" button.
To turn the PDP Monitor off :
Press "Standby" button on the PDP Monitor.
If ON Time setting is set, the standby power should be ON.
To turn on/off by remote controller :
Press the Power button of remote controller (If the PDP Monitor is not turned on, check that the AC Power Cord
on the PDP Monitor main body is connected. The standby power indicator will light up red if turned on).
Powering the PDP Monitor
Initial Settings
When the brand new television set it turned on for the first time, following settings can be set using the plug
and play function of the TV.
Using the menu
Use to move to the desired "Language".
Press to select.
the desived Language
Press to go back to the previous menu.
Press .