User's Manual

How to Use as PC monitor

PC Connections

Connection

Connect PDP TV's PC Input terminal to PC's RGB terminal using the D-Sub cable.

If there is a DVI-D terminal in your PC, use the DVI to HDMI connecting cable.

Connect PDP TV's PC Audio terminal to PC's Audio terminal using the Audio cable.

(Only for PC's with Audio terminal)

1. Turn on the PDP TV and press on the remote controller.

2. Use to move to "PC".

If DVI-D has been connected, select "HDMI/DVI"

Set the PC video output mode to VGA (640 480)/ SVGA (800 600)/ XGA (1024 768)/SXGA (1280 1024, 60Hz).

If the video mode is higher than SXGA (1280 1024, 60Hz) "Out of Range" message appears.

Be sure to set your PC video format to below SXGA mode.

< PDP TV Back view >

Connection terminals of other equipmetns differ by manufacturer and model.

PC Audio Cable

Analog RGB(D-Sub 15 pin) Cable

DVI to HDMI connecting cable

< PC >