Instructions

ManualsBrandsE Sun Electronics ManualsHotspotE Sun Electronics Panther X2 Hotspot

Panther X2 Product manual

1. Product description

Since E-Sun Electronics Limited launched the Panther X1 Hotspot, the product has been a big

success and welcomed by most users. As E-Sun Electronics Limited focuses on building a

series of high-quality products in the Internet of Things field in the next ten years, the team has

been committed to continuously advancing the research and development and iteration of

Panther X series products and launching a new Panther X2 Hotspot.

Panther X2 has a 4-core high-performance processor with 22nm advanced technology, ultra-

low power consumption and ultra-long-distance IoT hotspot gateway. In addition, as an

information converter for the LoRa communication protocol, Panther X2 helps communicate

between network servers and end nodes.

Panther X2, featuring a signal coverage of around 10-20 km, runs at an ultra-low-power and

can connect to over 2,000 LoRaWAN end nodes within its range. It is susceptible, safe, reliable,

and easy to interact with and can be used for environmental monitoring, asset tracking, smart

agriculture, and other long-range ultra-low-power IoT applications.

Picture 1: Panther X2

Summary of content (6 pages)

PAGE 1
Panther X2 Product manual 1. Product description Since E-Sun Electronics Limited launched the Panther X1 Hotspot, the product has been a big success and welcomed by most users. As E-Sun Electronics Limited focuses on building a series of high-quality products in the Internet of Things field in the next ten years, the team has been committed to continuously advancing the research and development and iteration of Panther X series products and launching a new Panther X2 Hotspot.
PAGE 2
. Architecture Panther X2 sends and receives LoRa frames, modulates/demodulates signals, processes LoRa frames and higher-level protocol-related tasks, and eventually transmits data to the LoRaWAN server via Ethernet or WiFi. 3. Solution About LoRa LoRa is a revolutionary RF physical-layer modulation technique that provides long-range wireless connectivity, excellent power supply efficiency, extremely high receiver sensitivity, full spread spectrum and secure, encrypted transmission.
PAGE 3
network capacity, the quality of service, the security, and the variety of applications served by the network. 4. Advantages 1、 High performance configuration: Powered by the latest RK3566 quad-core Cortex-A55 1.
PAGE 4
6. Product specifications Hardware Specification CPU ● Quad-core Cortex-A55 up to 1.8GHz Memory ● DDR 4GB Storage ● eMMC 32GB+ TF Card 64GB ● AS923/US915/EU868/CN470 ● 2.4GHz 1Tx/1Rx 802.11 b/g/n ● Built-in antenna ● 2.4GHz BLE 5.2 ● Built-in antenna Crypto chip ● Microchip ATECC608A LAN interface ● RJ45 1Gbps x 1 TF ● External TF card slot ● Supports SDXC or higher speed ● External USB-A 2.
PAGE 5
7. Lights 8. Dimensions 140x110x24 mm 9.
PAGE 6
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.