User's Manual
02
8
CAMERA
① Only for firmware upgrade
② Camera Lens
③ RESET button
④ Mini USB connection
⑤ On/Off/PAIR button
⑥ Power and charging
status indicator LED
⑦ Microphone
⑧ Mount hole
NOTE:ON/OFF: Press and hold button for 3 to 5seconds.
PAIR: Press and quickly release button.
1.NIGHT-VISION( IR)OPERATION:
The camera is equipped with eight(8) Infrared LEDS for night-
vision operation. In low light situation the Infrared LEDS turn-on
automatically, to activate night-vision.
NOTE: The night-vision picture is always black & white and not
that sharp. This camera has up to 10 feet night-vision range.
2. USING CAMERA STAND/MOUNT
● Screw the camera the /mount and as shown
or to a wall or ceiling(screws no included).
on stand setup
screw it