User's Manual

4. USING THE TRANSMITTER(CAMERA)
● For optimal transmission, place the camera in the room to be
monitored in such a way as to ensure the optimal surveillance of
your baby or the elderly.
You can also mount the camera using the stand included as
described in section 2
.
Note:For safety reasons and for optimum sound transmission we
recommend that you keep the transmitter at least 1 meter(3 feet)
from the baby.
IMPORTANT:Never place camera in the baby's cot, bed or playpen!
NOTE:The transmitter will automatically turn on when plugged
into AC adapter or computer.
● The transmitter can be powered with the , the rech-
argeable battery, or via computer USB cable.
● To use the rechargeable battery, the device shall be turned on
without the plugged in.
● The transmitter turns on when the ON/OFF/PAIR button is pressed
for 5 seconds. As soon as the camera is powered on the LED
indicator flash green to
.
, ress ON/OFF/PAIR button for 5 seconds.
● When the battery voltage falls below 3. 6V the Power Indicator
LED turns red from green,indicating the battery needs to be
charged.
The receiver displays "Camera battery is low" on the screen.
IMPORTANT:
.
(hardware to mount the stand to a wall
or ceiling not included)
AC adapter
's USB port using a
AC adapter
turns solid green or es indicate the
camera is powered on
To turn camera off p
In case of audio or video interference press and
release RESET button to switch transmitter to a different channel
04