User Manual
Table Of Contents
12-12
Digit Training Settings Page
Tap Voice Commander Settings and then the Digit Training tab. This
function trains a set of personal voice model to increase accuracy in
recognition for users with heavier accents.
: Voice tag is built.
: Current digit to be recorded.
Check “Use adapted model” to use
the model tailor made for you with
better recognition ability.
Record Button: Start
recording the assigned digit.
Cancel Button: Cancel
recording.
Remove All Button: Delete
all voice tags.
There are 10 sets of built-in 6-digit numbers that you have to recite. The
steps are as follows:
1.
Tap
Record Button. When you hear a beep, start reciting the
displayed numbers.
2.
After reciting, the system plays the numbers you just recited so that you
can check if it is correct.
3.
If correct, please tap Yes and the system prompts you to continue reciting
the next set of numbers for recording.
4.
If it is necessary to recite these numbers again, tap No and then recite
again.
5.
While recording, you can tap
Cancel Button to cancel the recording
for this number.
6.
If you are not satisfied with the sound recorded before, tap
Remove
All Button and the system will delete all recorded sounds. Please record
again.
7.
After recording 10 sets of numbers, the system will tell you that the voice
model is already built.