User Manual

15-4
8.
The contact point of my stylus is not quite precise. What should I do
about it?
Answer: Align the screen in place, and the touch screen can respond to the
operation of your stylus more precisely. The following two ways will bring
you into the touch screen calibration mode.

Tap , Settings, the System tab, Screen, and then Align Screen
Button.

Simultaneously press the Left Soft-Key on the bottom-left of the Pocket
PC and the round execution button in the center of the navigation pad.
9.
The hardware buttons of my Pocket PC doesn’t make any response
or calls a wrong program. What should I do about it?
Answer: Tap
, Settings, the Personal tab, and then Buttons. Check
each button for correct setup.
10.
My Pocket PC's Activesync cannot be executed or make a
connection. What should I do about it?
Answer:

Make sure you have installed the latest version Activesync 4.1. The CD
accompanying the product contains the software. If you have lost the CD,
you may download it from the Microsoft Website.

Make sure the charger as well as the USB cable provided along with the
product are already connected up to your PC end.

Make sure you are not executing another program that uses the same serial
port you selected for operation during installation.

If your Activesync is still not working, remove the Activesync software at
the PC end and install it once again.