Specifications

4-8
4
Fuel tank cap
Remove the fuel tank cap by turning it counter-
clockwise.
Fuel
Make sure that there is sufficient fuel in the tank.
Fill the fuel tank to the bottom of the filler tube as
shown.
1. Fuel tank cap
1
Transmission gear selector
The ATV is equipped with a fully automatic C.V.T.
transmission and has forward and reverse gearing.
A transmission shifting shaft is located on the right
hand side of your engine.
The shifting shaft has three positions ("R" "N" "F").
"R" = Reverse
"N" = Neutral
"F" = Forward
The shifting shaft must be placed on "N" to start
the engine. Once the engine is started, engine the
brake lever and move the shifting shaft to the
desired direction of travel.
Always be sure the vehicle has come to a complete
stop and the brake lever is fully engaged before
moving the shifting shaft.
Always pause in the "N" neutral position for a few
time to disengage and resynchronize.
F
N
R
seconds when shifting from forward to reverse or
from reverse to forward, this allows the transmission