Specifications

3D DRAWING
C.D.I
We can find C.D.I under the seat. It include shift control system. Replace it if control system invalid.
There is a speed-limited adjuster in the corner. Adjust speed-limited as follows:
SENSOR
Inspect wire for break or damage and check contact.
Measure sensor dimension as fig-1 after unscrew sensor.
If length is below 30mm, it must be replaced.
Smear with loctite 5699 and screw with torque 25 kgf-cm in assembly.
Service limits: 30 mm
Torque: 30 kgf-cm
fig-1
Senso r N2
Senso r R
Senso r N1
Sensor F
Shi
f
t Motor
Speed-Limited Adjuster
C.D.I
Speed-Limited Adjuster
C.D.I