Specifications

Before remove the front body cover
Picture 7
you should remove the handle bar cover firstly.
Secondly, you should disassembly the front and
rear brake cable and throttle cable, then
disassembly the handle bar.
As picture 7 unscrew the bolt then you can remove
the front body fender.
As picture 8 & 9 unscrew these three bolts then
Picture 8
you can remove the front R/L fender.
Picture 9
11.3 EXHAUST PIPE DRAWING
This pipe is for ATV RXL 50/70/90 and RXL 90R and RXL 50M serial