Owner`s manual

Page 12

Oil Cooler

The engine oil is cooled by pumping the oil

through an external oil cooling radiator located

at the front of the unit. It is important that the

cooling fins of the radiator be kept clean of dirt

build up to prevent engine overheating.

Remove any build up of mud and dirt from the

cooling unit with a pressurized spray of water.

Inspect the Oil cooler line for leaks and

damage. Replace any damaged lines and

repair any leaking connections before starting

the engine.

Transmission

Shifting

Your ATV is equipped with a fully automatic

C.V.T. transmission and has forward and

reverse gearing. A transmission shifting shaft

is located on the right hand side of your engine.

The shifter has three positions “F” Forward, “N”

Neutral and “R” Reverse.

The instrument panel has three lights that

correspond to the transmission shifter shaft

position.

The transmission must be placed in the “N”

(neutral – Green indicator Lamp) to start the

engine.