User's Manual

ETOP 158
User’s Manual V1.0
(1.) Enable: please choose to enable it or not.
(2.) Band: please select the frequency.
(3.) SSID: please enter the SSID.
(4.) Data Rate: please select the data transmission rate.
(5.) Access: enable this function can let clients use 2 access types: a. LAN+WAN:
the client can access to the Internet and connect to Server Router’s GUI to
setup. b. WAN: the client can only access to the Internet.
(6.) Active Client List: display the properties of the client which is connecting
successfully.
(7.) Apply Changes: Please click Apply Changes to initiate or click Reset to
cancel.
Take the client side of wireless network card as an example:
The Client can search for Server Router_AP1 (LAN+WAN) and connect to it.
If the client connects to it successfully, it will display message to notify
users.