User's Manual

ETOP 193
User’s Manual V1.0
6.3.4 Printer Server
The two USB ports on Server Router are for connection with printers to be shared
on the local area network. Follow the below steps to setup your PC to connect to a
Printer server.
1. Enable Printer Server
Check Enable for applying printer server.
2. Printer Model
The printer model will be shown when plug the USB printer.
3. Printer Name
Input the name of printer you like.
4. Printer Description
Input the description of printer as your demand.
5. Apply & Cancel
Click on Apply button to continue. Click on Cancel button to clean the setting
on this page.
Besides above setting finished, the printer setting on PC also needs to be set as
follows.
6.3.4.1 Printer Setting for PC
After Enable Printer Server in Quick Setup and Printer Server Configuration, please
follow below steps to set the detail LPR settings in your PC. (Below example is for
Windows XP platform.)