User Manual

Version 1.0.15
132
5. IAPP
Inter Access Point Protocol. Allow seamless roaming between Access Points in your
wireless network. Coupled with superior RF performance
6. Protection
Select to enable the wireless protection or not.
7. Aggregation
Data aggregation can reduce the amount of data routed through the network, and increasing
throughput.
8. Short GI
Enabling the Short Guard Interval increases the wireless transmission.
9. RF Output Power
User can adjust the RF output power to get the best wireless connection. There are 5 power
types available: 100%, 70%, 50%, 35%, and 15%.
10. Apply Changes & Reset
Click on “Apply Changes” to save the setting data. Or you may click on “Reset” to clear all
the input data.
7.2.3 Wireless Site Survey
This function provides users to search existing wireless APs or wireless base stations from
ISP. You can connect to a wireless AP manually in WiFi AP mode. The designed AP will
appear on SSID column in Wireless Basic Setup page.
Please click on Refresh to refresh the list. Click Connect after select an existing AP to
connect.