User's Manual

35
Quick Setup Guide V1.0
All of the 4 major items must be set in configuring Router Basic Setup. Please
click on “Next” button to start configuring.
2.2.1 LAN Setup
If you are using the R620g with multiple PCs on your LAN, you must connect the
LAN via the Ethernet ports on the built-in Ethernet switch. You must assign a
unique IP address to each device residing on your LAN. The LAN IP address
identifies the router as a node on your network; that is, its IP address must be
in the same subnet as the PCs on your LAN. The default LAN IP is
192.168.1.254.