User's Manual
http://www.sapido.com.tw 43
USER MANUA
L
V1.0
or limit the properties for each SSID, increasing the flexibility and efficiency of the
network.
(1) Enable: check it for enable or not.
(2) Band: select the frequency from the drop down list.
(3) SSID: please enter different SSID in each class.
(4) Data Rate: please select the data transmission rate.
(5) Access: defined the access type.
a. LAN+WAN: the client can access to the Internet and connect to WA982N
Broadband Router’s GUI to setup.
b. WAN: the client can only access to the Internet.
(6) Active Client List: display the properties of the client which is connecting
successfully.
(7) Apply Changes: Please click Apply Changes to initiate or click Reset to cancel.
4. Network Type:
Please select “Infrastructure” or “Ad hoc.” The default is “Infrastructure.” The selection is
disabled when wireless mode is selected to AP.
5. SSID:
Please input your wireless network name. Default is “WA982N_Broadband_Router”.
6. Channel Width
Please select “Auto"、“20MHZ” or “40MHZ” channel width to change the transmission