User's Manual

http://www.sapido.com.tw 45

USER MANUA

V1.0

Step 2. Setting the same SSID, channel and security you got form “Network Config”

and Click on Apply Changes to save the setting

Note: The DHCP server should be disabled under menu “LAN Interface Setup” and then the URM could be

enabled.

Step 3. Check the AP connectors and the Wireless connecting status.

14. SSID of Extended Interface

When mode is set to “AP” and Universal Repeater Mode is enabled, user should input SSID

of another AP (the upper level device) in the field of SSID of Extended Interface.

15. Apply Changes & Reset

Click on “Apply Changes” to save the setting data. Or you may click on “Reset” to clear all

the input data.