User's Manual
22
13. TROUBLESHOOTING
** ERROR CODES
E1 – Overcurrent protection – This error appears
when the scooter is accelerated, and the engine is
not allowed to function for more than 4 seconds.
The E1 error disappears when you release the
acceleration lever.
E2 – Communication error in the
control block. This error clears when interacting with
the scooter, resetting the communications. (for
example, the error can clear when you accelerate or you
use the braking system)
E3 – Overvoltage error- This error appears when the battery is not operating within
the normal parameters (for example if you accelerate while you are riding down a
slope). The E3 error clears when the battery is brought back within normal parame-
ters. Turn the scooter o and on to help the battery get back to normal parameters.
E4 - Communication error between the controller and the display. Please send the
scooter to the nearest authorized service.
14. PROTECT THE ENVIRONMENT
Waste disposal of the packaging
The packaging used to protect the scooter during transport is totally recyclable. For
recycling information, please contact your local authorities.
Waste disposal of electrical and electronic equipment
Information for users on the disposal of waste electrical and electronic equipment
(household):
The presence of this symbol on the products, packaging and / or accompa-
nying documents indicates the prohibition of mixing electrical and
electronic products with ordinary household waste.
For proper treatment, for the recovery and recycling of old products, please deposit
them at the special collection points created in accordance with national legislation.
By properly depositing them to waste collection points, you will help save valuable re-
sources and prevent potential negative eects on human health and the environment
For more information on collection and recycling, please contact your local author-
ities. Incorrect disposal of this waste may be punished according to national laws.