INSTRUCTIONS FOR USE Deep Fryer Model: EW-09135 Voltage: 120V~60Hz Wattage: 1600W
THIS PRODUCT IS ONLY FOR HOUSEHOLD USE ONLY. READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USE Thank you for choosing this deep fryer. Please read these instructions carefully to get the best results from your appliance. ● Before connecting the appliance, please check if the voltage indicated on the bottom of the appliance is in accordance with the main voltage in your home. ● Please locate the appliance and plug accessible to the power socket. Warning: ● Keep the appliance away from children.
Using your fryer Introducing the oil or fat ● Open the top lid. ● Lift the basket using the handle. ● Place approximately 3.5 liters of oil or 3.0 kg of hard fat into the fryer body (the level must always be between the two marks on the oil container wall). ● If you use blocks of fat, cut them into pieces before placing them in the body. ● Set switch of the temperature controller to 300 ºF (the red Indicator light comes on). To melt the fat needs roughly 8 minutes.
Practical advice 1. Oils and fats ● Always use oil and fats which can withstand high temperature. ● Do not mix different types of oil or fat. ● Change the oil or fat when it becomes brown after cooking. 2. Preparing the food ● Whatever the recipe used, the food must be perfectly dry: this will avoid overflowing and make the oil or fat last longer. ● When preparing potato-based food (chips, crisps, etc.), cut them up and then wash them in cold water to remove the starch. Dry them carefully.