Owner`s manual
−
20
−
ENGLISH
10. PREPARATIONS FOR STORAGE
ENGINE OIL
■ Change the engine oil with fresh oil.
■ Remove the spark plug, pour about 5
cc of engine oil into the cylinder,
slowly start the engine for 2 or 3
seconds, and re
-install the spark
plug.
USE UP THE FUEL
If you will not use the engine for more
than 1 month, run the engine until there
is no fuel left, and then store the
equipment in a location with low
humidity in order to prevent start-up
problems and operation trouble due to
deterioration of the fuel.
CLEAN AND STORE
■ Remove the spark plug wires from
the spark plugs.
■ Slowly turn the crankshaft until
resistance is felt and leave it in that
position.
■ Clean the engine thoroughly with an
oiled cloth, cover the engine, and
store the engine indoors in a well
ventilated, low humidity area.
Flame Prohibited
WARNING
EH72FI us_EU6943 09.12.21 3:07 PM ページ20