User`s manual

B. DESCRIPTION OF THE DIFFERENT CLEANING MODES
 AUTO: Enable automatic cleaning mode the robot vacuum cleaner. It will clean for about 60
minutes before returning automatically to its dock station and recharge its battery.
Mode 1: e.ziclean® VAC 100 robot will clean until its battery is empty and automatically start
searching for its station to be charged.
Mode 2: Working time 30 min
Mode 3: Working time 15 min
 SPOT: The robot vacuum cleaner concentrates its cleaning navigaiton on a restricted working
area. This mode is suitable for relatively small areas and particularly encrusted in dirt.
Mode 1: spiral navigation (1-4 min)
Mode 2: zigzag navigation (1-4 min)
 WALL FOLLOW: The robot will follow the walls so that it concentrates its cleaning along plinths
and corners (1-4min).
 DOCKING: The robot will search for its station to get recharged. Press DOCK button on the
screen or from the remote control to activate docking function.
n UV: Press the UV button on the screen or from the remote control to activate this function.
Once activated, the robot will disinfect floors thanks to the UV sterilizing technology. Press this
button again to disable this function.
Press the MODE button to scroll through the main different cleanings methods described as above
(AUTO, SPOT, WALL FOLLOW).
Then press PROGRAM button to reach the under-selection Modes described as above (Mode 1,
Mode 2, Mode 3).
Finally press the START button from the robot screen to launch the selected cleaning mode.
C. DIRT DETECT FUNCTION
The e.ziclean® VAC 100 is equipped with a dust sensor. The DIRTY Led from its screen display will
blink while the robot detects dusty areas. It will target and intensify its navigation on the area until
its gets fully cleaned.
D. DESCRIPTION OF THE DIGITS DISPLAY ON THE LCD SCREEN
The LCD screen of e.ziclean® VAC 100 vacuum robot gives a continuous status of its running
functions. It also allow to know how many minutes the robot has been cleaning or charging since its
starting process.
While cleaning, the digits display on the LCD increase of 1 digit per minute.
During charging, the digits display on the LCD increase of 1 digit every 10 minutes.