Manualshelf

User's Manual

ManualsBrandsE2V Technologies ManualsCamera & PhotoLRT Transmitter module for use with Thermal Image Camera
11121314151617181920
©e2v technologies (uk) limited 2010 107553 09 Aug 2010 DAS762156AA (UK) Version 11, page 10
SECTION 4 - Argus
®
4 Receiver Kit P7030RKT
The Argus
®
4 receiver kit is a USB wireless network adaptor that
allows the transmitted video from the camera to be viewed on a
PC/Laptop. The receiver kit is supplied with:
• Wireless network adaptor and 1.5 m USB lead
• Installation CD for the adaptor
• Software CD containing video player DAS762581AA
• User Guide (this booklet) DAS762156AA
• Manufacturer’s user guide and warranty
This accessory allows the receiving of the Argus
®
4 thermal image
transmitted over Wi-Fi. The user must have a suitable computer in
order to view camera output. This product is offered to be compatible
with the instructions and guidance given for the other video
accessories and the model selected has been tested with the
camera to ensure that the expected range performance is obtained.
Note that the exact equipment supplied may vary from these pictures due to product evolution in
the IT market.
INSTALLATION
These instructions show how to set up a simple camera to computer link. For more complex
arrangements see section 9 and the FAQ.
It is recommended that the system be set up on a desk and some familiarity is gained before
making a permanent installation and using operationally.
The first step is to install the network adaptor on the PC/laptop/tablet PC and configure the
resultant connection set up to work in ad-hoc mode. For computers using Windows XP (SP2+)
and Vista operating systems, wireless networking is supported directly and this is the
recommended route and is shown below. For earlier versions (e.g. Win2000), the full device
software will need to be installed by following the installation instructions given for the Network
Adaptor.
The installation procedure may require administration rights on the computer used, depending
upon the individual policies applied to it.
Plug the adaptor into the
chosen PC/laptop and the
adaptor will be detected as
new hardware.
Do not choose to use
Windows Update