User's Manual

©e2v technologies (uk) limited 2010 107553 09 Aug 2010 DAS762156AA (UK) Version 11, page 15
USE WITH ACCESS POINT SOFTWARE
As noted above when used with Win2000, and optionally with newer operating systems, the
wireless adaptor can be run using the manufacturers’ own software. Operation is essentially
similar in that the camera transmitter is detected in a survey screen and a connection is then made
to it.
The installation will be described in the documentation included with the access point.
An example of using Linksys software with a Linksys access point is shown below.
In some cases manufacturer software has been noted as more likely to attempt connection to
similar devices on a different network. It is therefore recommended to use the built-in Windows
software if possible.
Run the survey to see the available
networks either from a shortcut
provided by the software or from a
system tray icon.
In the screen shown opposite argus4
is shown as one of the networks
available.
Select the Argus4 network and press
connect.
The wireless network adaptor will now
connect to the Argus4 network and
camera video is now available to the
player.
Once connected, the following screen
will appear showing connection
information.