User's Manual

ManualsBrandsE2V Technologies ManualsCamera & PhotoLRT Transmitter module for use with Thermal Image Camera

©e2v technologies (uk) limited 2010 107553 09 Aug 2010 DAS762156AA (UK) Version 11, page 27

Select the COM port where the

transmitter is connected and click on

Connect.

The word “Connected” should now turn

green, and the Connection status

indicator show green.

The boxes will fill with the current

settings.

Now click ‘Advanced’

Now set the frequency and adjust the

power level if necessary to meet the

license conditions granted to you.

1. Enter the output frequency in MHz.

This example shows a DTX1400 set to

a frequency of 1395 MHz.

The frequency entered is the centre

frequency. This must be more than 2

MHz away from any frequency band

limits specified in the licence.

2. Adjust the power level if required.

The transmitter is 100 mW output when

set to 0 dB attenuation.

For 25 mW set 6 dB attenuation.

For 10 mW set 10 dB attenuation.

3. Click ‘Apply’.

Allow for the antenna gain if setting for

a maximum permitted e.i.r.p. level.