User's Manual

©e2v technologies (uk) limited 2010 107553 09 Aug 2010 DAS762156AA (UK) Version 11, page 37
The delay between the camera
image and that displayed
should be reduced from the
default value.
Enter the “Control” drop-down
menu in Ateme Player and
select ‘Ateme Filters’ and then
‘RTP Client’.
The properties window will
then appear.
Set the “Buffering, in
milliseconds” value down from
the default of 3000 to a much
lower figure; it should be set to
30.
Note that a setting of 0 may be
found to be unsatisfactory.
Click ‘Apply’ and ‘OK’.