User's Manual

©e2v technologies (uk) limited 2010 107553 09 Aug 2010 DAS762156AA (UK) Version 11, page 41
Connect the camera to a
computer with the USB lead
and run the customer
software.
Select the ‘Change
Customisable Settings’ option.
Tick the ‘Change Network
settings’ box.
Enter the desired IP address.
Click ‘Save to Camera’.
The camera does not use automatically assigned DHCP IP addresses. It is recommended that the
address(es) used for cameras be denied to DHCP address allocation in the router set-up.
Further cameras can be connected as required, but each must be set to a unique IP address in
the range used by the router.
A system may also be configured with the router set to use the address range of the cameras
(10.133.xxx.xxx), but note that as all cameras are given the same address in the factory at least
one will require to be changed to implement a multiple camera configuration.