User's Manual

©e2v technologies (uk) limited 2010 107553 09 Aug 2010 DAS762156AA (UK) Version 11, page 46
3. There is a delay between the video on my camera and the digital video being displayed
on my computer.
If you notice a delay between the video being displayed on the Argus
®
4 camera and the video
being displayed on the PC, then this is likely to be due to buffering of the video data by the player.
This buffering can be reduced in the Ateme player as follows:
Enter the “Control” drop-down menu in Ateme Player and select ‘Ateme Filters’ and then ‘RTP
Client’.
The properties window will then appear, and “Buffering, in milliseconds” should be set to 30. Click
‘Apply’ and ‘OK’. A value of 0 is not recommended.
The Ateme player gives by far the best results; similar buffering and delay problems afflict other
players but are not so readily or successfully resolved.