User's Manual

3 Optional Functions

3.1 SPOT TEMPERATURE MEASUREMENT

. The addition of a sensor to the

camera allows the operator to

view the average scene

temperature (within a defined

area). The temperature is

displayed as an overlay on the

camera video.

. This system is intended to give the

operator the ability to detect

possible hazards such as hot gas

bottles or tanks. The camera can be configured to give a reading in 8Cor8F

by using the user software (see section 5).

. Scene temperatures between 0 8C (32 8F) and 500 8C (932 8F) can be

displayed. If the temperature lies outside this rang e a 4 or 5 symbol

appears before the reading indicating that it is outside the possible range.

Note: If the object in the scene does not fully fill the sample window, then a false

reading may be obtained. Care should be taken not to cover up the sensor

window (with a hand for example) when using this system.

3.2 TRANSMITTER

The transmitter is house d inside the camera and is powered by the camera

battery. It is designed to allow remote viewing of a thermal image from the

camera. To switch on the transmitter, press and hold the transmitter ON button

at the rear of the camera. When the transmitter is turned on, the transmitter on/

channel number symbol will appear to the right of the battery status indicator.