User's Manual

WARNINGS
Electrical hazards
Do not remove the cover of the charger, or disassemble the charger power lead
or rechargeable pack. There are no user serviceable parts within the charger,
charger lead or the rechargeable pack.
Charger misuse
The charger must only be used for the charging of rechargeable packs; do not
insert any other item into the charger. The charger must not be used to charge
primary cells; the charger will not accept the primary cell pack. Do not use a
damaged charger. Do not attempt to charge damaged packs.
Disposal
The Ni-MH cells contained within the pack must be disposed of in accordance
with local regulations. Do not incinerate. Do not attempt to charge damaged
packs.
Environmental
The charger must not be subjected to water spray, rain or immersion.
CAUTION
The Camera and Rechargeable Bat tery System are despatched from e2v
technologies in a safe conditi on. Any unauthorised modifications may
compromise safety and invalidate the warranty. The Camera and Rechargeable
Battery System are designed to be safe when used in accordance with the
instructions provided.
e2v technologies does not ac cept responsibility for damage or injury resulting
from failure to follow the instructions provided.
All matters arising which relate to the safety of products should be reported
immediately, in writing, giving full details to The Product Safety Officer at e2v
technologies.
NOTE
The Argus
1
3 BST thermal image camera contains an export-controlled
component and may not be shipped to another country without the prior
approval of the US Government, which should be requested from e2v
technologies.