User's Manual

. Turn on the unit using the middle
RED button on the rear. A RED
light will be illuminated in the
position shown. A long (3 second)
press is required to switch the
camera off.
. After switch-on and for
approximately 10 seconds, a
splash screen will be displayed
on the camera screen while the
system performs a self-test
routine. This splash screen is
customer configurable – see
section 5.
. After 10 to 20 seconds
(depending on ambient
temperature and sensor type) the
thermal image, with battery status
display, time and date and
ambient temperature, will
appear. If spot temperature
option is included, the sample
window and spot tempera ture
will also appear.
5