Use and Care Manual

Technical
Data Sheet
E6000
®
CRAFT ADHESIVE
Clear, Black and White
E6000
®
CRAFT | Rev 03 – Effective: 2015February / Approved: 35TMorgan Page | 1
Eclectic Products, Inc.
Manufacturing Facility
101 Dixie Mae Drive
Pineville, Louisiana
eclecticproducts.com
800.349.4667
ISO 9001:2008
Compliant
Quality Management
Systems
Administration Office
Eugene, Oregon
eclecticproducts.com
800.693.4667
PRODUCT DESCRIPTION
E6000
®
Craft is uniquely formulated to meet high-performance industrial requirements,
thus making it an excellent craft adhesive. It is washer/dryer safe, paintable, and
extremely flexible. E6000 has exceptional adhesion to wood, metal, glass, fiberglass,
ceramics, masonry and concrete. It also adheres strongly to leather, rubber, vinyl and
many plastics.
WHERE TO USE / APPLICATIONS
Use on all your craft projects requiring a permanent bond. Available colors are: clear,
black and white.
FEATURES AND BENEFITS
EASY TO USE – easy squeeze tube
FLEXIBLE – does not become brittle in cold weather
CHEMICAL RESISTANT – safe for applications exposed to dilute acids and dilute caustics
ABRASION RESISTANT – great for bonding objects subject to normal wear
WASHER/DRYER SAFE – maintains bond even after washing and drying
PAINTABLE – paint to match surrounding area or to make UV resistant
TECHNICAL INFORMATION
PROPERTIES
UNCURED MATERIAL
Color:
VOC:
Solvent:
Non-flammable:
Density:
Solids:
Viscosity:
Tack time:
Set time:
Full cure time:
Storage:
Freeze/thaw stability:
Shelf life:
Clear, Black and White
2 grams/liter
Perchloroethylene
Yes
11.0 +/-0.1 lbs/gal
30% by weight, 40% by volume
100,000 cps
~ 4 minutes
20 minutes*
Thin film: 24 hours / Thick film: 48-72 hours
Ideal temperature range: 50 to 80 °F (10 and 27 °C). Product may thicken
when stored in colder temperatures. If product thickens from colder
temperatures, warm to room temperature before use.
Stable, allow product to warm to room temperature before using
2 years (unopened)
*Depending on material, humidity and temperature.
CURED MATERIAL
Chemical resistance:
Hardness:
Dielectric strength:
Tensile strength:
Elongation:
Service temperature:
Excellent to water, dilute bases
80 Shore A
400V/mil (ASTM D-149); this is the maximum voltage that can be applied
to a given material without causing it to break down
3500 lb/in
2
(ASTM D-412)
900% (ASTM D-412)
-40 to 150 °F (-40 to 66 °C)