SAFETY DATA SHEET E6000 LV WHITE Section 1. Identification Product name : E6000 LV WHITE Product code : 1000139 Relevant identified uses of the substance or mixture and uses advised against Identified uses Adhesive. Supplier's details : Eclectic Products LLC 990 Owen Loop North Eugene, OR 97402 541-484-9621 Responsible name : Regulatory Affairs Emergency telephone number (with hours of operation) : INFOTRAC 1-800-535-5053 001-352-323-3500 24 hours per day, 7 days per week. Section 2.
E6000 LV WHITE Section 2. Hazards identification Disposal Hazards not otherwise classified : P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations. : None known. Section 3. Composition/information on ingredients Substance/mixture : Mixture Ingredient name % CAS number tetrachloroethylene Benzene, ethenyl-, polymer with 1,3-butadiene titanium dioxide ≥50 - ≤71 ≥10 - ≤25 ≤0.
E6000 LV WHITE Section 4. First aid measures Eye contact Inhalation Skin contact Ingestion : Adverse symptoms may include the following: pain or irritation watering redness : No specific data. : Adverse symptoms may include the following: irritation redness : No specific data. Indication of immediate medical attention and special treatment needed, if necessary Notes to physician Specific treatments : In case of inhalation of decomposition products in a fire, symptoms may be delayed.
E6000 LV WHITE Section 6. Accidental release measures Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Methods and materials for containment and cleaning up Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble.
E6000 LV WHITE Section 8. Exposure controls/personal protection Benzene, ethenyl-, polymer with 1,3-butadiene titanium dioxide Appropriate engineering controls Environmental exposure controls STEL: 100 ppm 15 minutes. TWA: 170 mg/m³ 8 hours. TWA: 25 ppm 8 hours. OSHA PEL 1989 (United States, 3/1989). Notes: See Table Z-2. TWA: 170 mg/m³ 8 hours. TWA: 25 ppm 8 hours. OSHA PEL Z2 (United States, 2/2013). AMP: 300 ppm 5 minutes. CEIL: 200 ppm TWA: 100 ppm 8 hours. None. OSHA PEL (United States, 5/2018).
E6000 LV WHITE Section 8. Exposure controls/personal protection Other skin protection Respiratory protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. : Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification.
E6000 LV WHITE Section 10. Stability and reactivity Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced. Section 11.
E6000 LV WHITE Section 11. Toxicological information Product/ingredient name OSHA IARC NTP tetrachloroethylene Benzene, ethenyl-, polymer with 1,3-butadiene titanium dioxide - 2A 3 Reasonably anticipated to be a human carcinogen. - - 2B - Reproductive toxicity Not available. Teratogenicity Not available. Specific target organ toxicity (single exposure) Not available. Specific target organ toxicity (repeated exposure) Not available. Aspiration hazard Not available.
E6000 LV WHITE Section 11. Toxicological information General : No known significant effects or critical hazards. Carcinogenicity Mutagenicity : Suspected of causing cancer. Risk of cancer depends on duration and level of exposure. : No known significant effects or critical hazards. Teratogenicity : No known significant effects or critical hazards. Developmental effects : No known significant effects or critical hazards. Fertility effects : No known significant effects or critical hazards.
E6000 LV WHITE Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.
E6000 LV WHITE Section 14. Transport information Special precautions for user : Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. Transport in bulk according to IMO instruments : Not available. Section 15. Regulatory information U.S.
E6000 LV WHITE Section 15. Regulatory information Ingredient name No significant risk level Maximum acceptable dosage level Tetrachloroethylene Titanium dioxide Yes. - - The inclusion of titanium dioxide in California Proposition 65 as a carcinogen is related to the very small size of respirable nuisance particles. International regulations Chemical Weapon Convention List Schedules I, II & III Chemicals Not listed. Montreal Protocol Not listed.
E6000 LV WHITE Section 16. Other information Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program.
