SAFETY DATA SHEET FABRI-FUSE Section 1. Identification Product name : FABRI-FUSE Product code : 13000000-FF Relevant identified uses of the substance or mixture and uses advised against Identified uses Adhesive. Supplier's details : Eclectic Products LLC 990 Owen Loop North Eugene, OR 97402 541-484-9621 Responsible name : Regulatory Affairs Emergency telephone number (with hours of operation) : INFOTRAC 1-800-535-5053 001-352-323-3500 24 hours per day, 7 days per week. Section 2.
FABRI-FUSE Section 3. Composition/information on ingredients Substance/mixture : Mixture Ingredient name % CAS number propane-1,2-diol ≤3 57-55-6 Any concentration shown as a range is to protect confidentiality or is due to batch variation. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.
FABRI-FUSE Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media : Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media : None known. Specific hazards arising from the chemical Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : In a fire or if heated, a pressure increase will occur and the container may burst.
FABRI-FUSE Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Advice on general occupational hygiene : Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.
FABRI-FUSE Section 8. Exposure controls/personal protection Body protection Other skin protection Respiratory protection : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
FABRI-FUSE Section 10. Stability and reactivity Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced. Section 11.
FABRI-FUSE Section 11. Toxicological information Not available. Aspiration hazard Not available. Information on the likely routes of exposure : Routes of entry anticipated: Dermal, Inhalation. Potential acute health effects Eye contact : No known significant effects or critical hazards. Inhalation : No known significant effects or critical hazards. Skin contact : No known significant effects or critical hazards. Ingestion : No known significant effects or critical hazards.
FABRI-FUSE Section 12.
FABRI-FUSE Section 14. Transport information Environmental hazards No. No. No. No. No. No. Special precautions for user : Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. Transport in bulk according to Annex II of MARPOL and the IBC Code : Not available. Section 15. Regulatory information U.S.
FABRI-FUSE Section 15. Regulatory information Massachusetts : None of the components are listed. New York : None of the components are listed. New Jersey : The following components are listed: PROPYLENE GLYCOL; 1,2-PROPANEDIOL Pennsylvania : The following components are listed: 1,2-PROPANEDIOL California Prop. 65 WARNING: This product contains less than 0.1% of a chemical known to the State of California to cause cancer.
FABRI-FUSE Section 16. Other information Hazardous Material Information System (U.S.A.) / Health 0 Flammability 0 Physical hazards 0 Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them.
FABRI-FUSE Section 16. Other information To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.