SDS

FABRI-FUSE
Section 8. Exposure controls/personal protection
Respiratory protection
:
Body protection
:
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Liquid. [Paste.]
Not available.
1.04
>1 [Air = 1]
Not available.
Slight Ammonia.
Odor
pH
Not available.
Color
Evaporation rate
<1 (ether (anhydrous) = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: >101°C (>213.8°F) [Pensky-Martens.]
Not available.
8.71
Viscosity
Kinematic (40°C (104°F)): 12.67 cm
2
/s (1267 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
>100°C (>212°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
Flow time (ISO 2431)
:
Not available.
Section 10. Stability and reactivity
Conditions to avoid
No specific data.
The product is stable.
Chemical stability
No specific data.
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
11/9/2018
Version
:
1.03
5/12