User manual

Irrtümer und Änderungen vorbehalten

Functional description

Battery prole for Nickel batteries

Values in brackets dene the setting range

Minimum battery voltage required for charging

Precharge current (in C) (Example: Battery with 100Ah -> 1C = 100A)

Precharge end voltage

Precharge maximum time

Minimum battery voltage change (∆U) before charging stop

Normal charge maximum time

Absolute battery temperature range allowed for charging

Max. allowed temperature change during the charging procedure

Max. allowed temperature slope

Operation as Power Supply

The charger can also be operated as a power supply

with fully adjustable output voltage (0...100% U

Nom

) and

adjustable output current (0...100% I

Nom

). Furthermore,

the overvoltage protection threshold can be predened

in the device setup.

Switching to power supply mode is done like this:

-> General settings + -> Use of Device

+ -> Power supply +

The main display will change to:

1. Line Actual values of voltage and current

2. Line Set values for voltage and current

3. Line Actual values of power, output condition

and alarm symbols/abbreviations

4. Zeile Device condition text

The buttons or are used to select either

the voltage set value or the the current set value for

adjustment. The display will change to adjustment

mode and invert the selected decimal place:

After this, the buttons and are used to

increase or decrease the decimal place‘s value.