User manual

Chapter 10, Diagnostic Testing
Step Action Result
6. Enter S to select the standard template
for the MSF application.
Valid characters to define the MSF
application for an IMSF card are:
• S (Standard template with DTI
circuit)
• M (Standard template with MF
transmitters / receivers)
• E (All energy detectors)
• D (All DTMF receivers)
• C (All 8 port conference bridges)
• T (All 12 port conference bridges)
• P (Call Progress Tone Detection)
The MSF application must be
"S" or "M" to support DTI functions.
The console displays:
APPLICATION NAME
or ?...IMSS =>
7. Press <Enter> to accept the default
application name, “IMSS.”
The application names that correspond
to valid MSF application characters for
the IMSF card are:
• IMSS (for standard template with
DTI circuit)
• IMSM (for standard template with
MF transmitters / receivers)
• IMSE (for all energy detectors)
• IMSD (for all DTMF receivers)
• IMSC (for all 8 port conference
bridges)
• IMST (for all 12 port conference
bridges)
• ICPD (for Call Progress Tone
Detection)
The console displays:
ENTER GROUP FOR
ANNUNICATOR.05.2.04.32...
...=> 453
ENTER GROUP FOR
ANNUNICATOR.05.2.04.33...
...453 =>
ENTER GROUP FOR
ANNUNICATOR.05.2.04.34...
...453 =>
.
.
.
ENTER GROUP FOR
DTMF..
.
05.2.04.45...452 =>
ENTER GROUP FOR
DTMF...05.2.04.46...452 =>
ENTER GROUP FOR
D
TMF...05.2.04.47...452 =>
ENTER GROUP FOR
DTMF...05.2.04.48...452 =>
8. Type an appropriate group number at
the prompts for the different types of
circuits.
The system creates card circuits as
defined by the application selected.
The standard template creates a DTI
circuit.
M
M
88 Aastra – 2489-005