User manual

Chapter 13, Whisper Messaging
Assign a Whisper Message to a User Group
Use this procedure to assign a whisper message to a user group that supports Dialed
Number Identification System (DNIS) definitions.
Step Action Result
1. At the main Administrative Console
prompt, type UGRP.
The console displays:
SELECT COMMAND => UGRP
SELECT MODE: PRINT, DISPLAY,
UPDATE, TITLES =>
2. Type U. The console displays:
UPDATE MODE: C-Create M-Modify
D-Delete =>
3. Type M. The console displays:
USER GROUP NUMBER (1-1000)
or ?... =>
4. Type the number for the user group to
modify.
The console displays:
SELECT SUBCOMMAND or ? =>
5. Type DNS. If the user group shares DNIS numbers
with other user groups, the console
displays:
** USER GROUP # SHARES DNSs
WITH OTHER USER GROUP DNSs
DISPLAY THE SHARING USER
GROUPS?: Y=Yes Return=No...=>
If not, the console displays:
SELECT FUNCTION: A=Add;
C=Change; R=Remove;
T=Title...=>
6. If the user group does not share DNIS
numbers with other groups, go to step
7. Otherwise, press the <Enter> key.
The console displays:
SELECT FUNCTION: A=Add;
C=Change; R=Remove;
T=Title...=>
7. Type A (Add). The console displays:
DNIS NUMBER or ?...=>
8. Type the DNIS ID (such as
18008888888) for the destination
DNIS for which the system will play
whisper messages.
The console displays:
DNIS ENTRY TITLE
ENTER TITLE...=>
M
M
104 Aastra – 2489-005