User manual

Chapter 13, Whisper Messaging
Assign a Whisper Message to a Trunk Group
Use this procedure to assign a whisper message for all calls from a specific trunk group.
Step Action Result
1. At the main Administrative Console
prompt, type GRPS.
The console displays:
SELECT COMMAND => GRPS
SELECT MODE: PRINT, DISPLAY,
UPDATE, TITLES, SEARCH =>
2. Type U. The console displays:
UPDATE MODE: C-Create M-Modify
D-Delete P-Copy =>
3. Type M. The console displays:
SPECIFY GROUP NUMBER:... =>
4. Type the number for the broadcast
trunk group to modify.
The console displays:
Specify TRGP Field to Modify
or - or ?... =>
5. Type WPR (Whisper Message
Source Group).
The console displays:
WHISPER MESSAGE SOURCE
GROUP or ?... =>
6. To assign an announcement trunk as
the message source, skip to step 7.
To assign a broadcast trunk as the
message source, skip to step 10.
To assign an IVC device as the
message source, skip to step 12.
7. Type the announcement trunk group
number.
The console displays:
ANNOUNCEMENT TRUNK PDT NUMBER
or 0=NONE... =>
8. Type the number of an optional
Prefix Digit Table (PDT) for the
announcement trunk or type 0 to not
assign a PDT.
The console displays:
Specify TGRP Field to Modify
or - or ?... =>
9. Skip to step 15.
10. Type the broadcast trunk group
number.
The console displays:
Specify TGRP Field to Modify
or - or ?... =>
11. Skip to step 15.
M
M
108 Aastra – 2489-005