User manual

IVC Card Features and Support
Step Action Result
12. Type the IVS group number
associated with the whisper message.
The console displays:
IVS PHRASE GROUP or ?... =>
13. Type the IVS phrase group number
associated with the whisper message.
The console displays:
IVS PHRASE ID or ?... =>
14. Type the IVS phrase identification
number for the whisper message.
The console displays:
Specify TGRP Field to Modify
or - or ?... =>
15. Press the <Enter> key. The console displays trunk group
information, including whisper message
parameters, followed by:
DOES UPDATE VERIFY? =>
16. Type Y to save the trunk group with
new whisper messaging parameters.
Set the Whisper Device Wait Time
Use this procedure to set the whisper device wait (WDW) time. When a whisper message
source is not available, the system delays for the WDW time before connecting the call to
its destination. The delay provides time for a source to become available.
Step Action Result
1. At the main Administrative Console
prompt, type UGRP.
The console displays:
SELECT COMMAND => UGRP
SELECT MODE: PRINT, DISPLAY,
UPDATE, TITLES =>
2. Type U. The console displays:
UPDATE MODE: C-Create M-
Modify D-Delete =>
3. Type M. The console displays:
USER GROUP NUMBER (1-1000)
or ?... =>
4. Type the number for a user group
associated with an IVC device that
supports whisper messaging.
The console displays:
SELECT SUBCOMMAND or ? =>
5. Type CHP. The console displays:
SPECIFY FIELD TO MODIFY
or - or ?... =>
M
M
Aastra - 2489-005 109