User manual

Chapter 13, Whisper Messaging
Step Action Result
6. Type WDW. The console displays:
WHISPER DEVICE WAIT TIME: 1-
15 seconds or N=None... =>
7. Type a number of seconds from 1 to 15
to set the WDW time, or type 0 to set
no WDW time.
The console displays:
SPECIFY FIELD TO MODIFY
or - or ?... =>
8. Press the <Enter> key. The console displays user group
information, including the WDW time,
followed by:
DOES UPDATE VERIFY?
9. Type Y to save the user group with
new WDW time.
Create a Prefix Digit Table that Supports Whisper Messaging
Use this procedure to create a Prefix Digit Table (PDT) that supports the Whisper
Messaging feature. A PDT is a construct that routes a whisper message number, outpulse
digits, or both to an announcement trunk.
Step Action Result
1. At the main Administrative Console
prompt, type PDT.
The console displays:
SELECT COMMAND => PDT
SELECT MODE: PRINT, DISPLAY,
UPDATE, TITLES, SEARCH =>
2. Type U. The console displays:
MODE: C=CREATE; M=MODIFY;
D=DELETE; T=TITLE... =>
3. Type C. The console displays:
PREFIX DIGIT TABLE NUMBER
or ?... =>
4. Type a number for the PDT. The console displays:
ENTER TITLE:..._________ =>
5. Type a title for the PDT. The console displays:
PDT USAGE: N=ON NET; O=OFF
NET... =>
6. Type N or O, as appropriate. The console displays PDT information,
followed by:
INFORMATION TYPE or ?;
Return=END... =>
M
M
110 Aastra – 2489-005