User manual

IVC Card Features and Support

Implement the IVS Phrase Manager

Implementing the Phrase Manager application requires the following equipment:

• Five Internet Protocol (IP) addresses (dummy addresses are valid on a closed

network)

• An Ethernet hub, switch, or installed Ethernet Bridge Card (EBC)

• OAI Toolkit

• IVS Phrase Manager software

• IVC card, with AMP-to-RJ45 adapter (installed; see "Install an IVC Card")

• Four straight-through Ethernet cables (typically blue)

The process to install the Phrase Manager application requires the following stages.

Before following this process, you must install at least one IVC card, create IVS groups,

create IVS phrase groups, and configure IVC devices. See appropriate procedures.

Stage Description

1. Verify that the switch enables IVS functions. See "Verify IVS Support."

2. Establish all hardware interconnections. See "Establish Phrase Manager

Hardware Connections."

3. Activate the connection to the network. See "Verify Network Connectivity."

4. Establish the OAI Channel. See "Establish the OAI Channel."

5. Configure an OAI channel on the PC. See "Configure OAI on the Phrase

Manager PC."

6. Install the Phrase Manager. See "Install the Phrase Manager Software."

Verify IVS Support

Use this procedure to ensure that your PointSpan switch has enabled the Integrated Voice

Services (IVS) feature.

Step Action Result

1. At the main Administrative Console

prompt, type SPAR.

The console displays:

SELECT COMMAND => SPAR

SELECT MODE: PRINT, DISPLAY,

UPDATE, TITLES, SEARCH =>

2. Type D. The console displays:

ENTER DISPLAY TYPE or ?...S=>

Aastra - 2489-005 25