User manual

Chapter 6, IVS Phrase Manager
Verify Network Connectivity
Use this procedure to verify the connection between the Aastra switch and the network.
Step Action
1. On the system console for the primary server, use the <Page Up> or <Page
Down> key to access the console monitor screen. At the prompt, type siteid
to display system IP addresses.
2. On the system console for the secondary server, use the <Page Up> or <Page
Down> key to access the console monitor screen. At the prompt, type siteid
to display system IP addresses.
3. On both system consoles, verify the IP addresses for server A, server B, for
the switch (Primary), and the Default Gate.
If you need to correct any IP addresses for the primary server, go to step 4.
If you need to correct any IP addresses for the secondary server, go to step 8.
If all IP addresses are correct for both servers, proceed with the procedure,
"Establish the OAI Channel."
Changing IP addresses requires you to reboot both servers; continue with this
procedure only when network traffic is light.
4. On the system console for the primary server, correct any of the IP addresses
on the console monitor screen. Press <Enter> to save the changes.
5. On the system console for the primary server, type XCM to terminate the
console monitor. At the resulting prompt, press the space bar.
6. Use either the <Page Up> or <Page down> key to access the TTY5 or TTY7
screen. At the prompt, log in. Then type reboot.
7. Allow the primary server to completely reboot.
8. On the system console for the secondary server, correct any of the IP
addresses on the console monitor screen. Press <Enter> to save the changes.
9. On the system console for the secondary server, type XCM to terminate the
console monitor. At the resulting prompt, press the space bar.
10. Use either the <Page Up> or <Page down> key to access the TTY5 or TTY7
screen. At the prompt, log in. Then type reboot.
11. Allow the secondary server to completely reboot.
M
M
30 Aastra – 2489-005