User manual

IVC Card Features and Support

Configure OAI on the Phrase Manager PC

Use this two-stage procedure to configure an Ethernet Open Application Interface (OAI)

connection on the PC running Phrase Manager. The Phrase Manager application requires

this OAI link to transfer audio files from the PC to the switch and to communicate with

the switch phrase database. Phrase Manager will not work unless this link is active.

Stage Description

Configure the OAI channel on the PC

Start the OAI driver on the PC

Initial Conditions

This procedure uses the Driver Control Program (DCP), a utility of the OAI Toolbox.

See the Open Application Interface Getting Started Guide (2518-nnn) for instructions to

install the OAI Toolkit. See the Driver Control Program (DCP) Administrator's User

Guide (2352-nnn) for instructions to use the DCP utility.

The DCP utility is for use by Aastra or with our direct assistance only. Before using the

DCP utility in any way not detailed in this manual or the DCP user guide, contact the

Technical Service Center (TSC) at 1-800-729-1872.

Configure the OAI Channel on the PC

Do the following:

Step Action Result

1. On the PC desktop, double-click the

DCP.exe icon.

The DCP main window opens.

2. Under the File menu, click New. The File | New window opens.

3. In the text field, type a name for the

driver (Phrase Manager defaults to

"DRIVER"). Click the radio button

next to TCP/IP, then click OK.

The Edit | Configuration window

opens.

4. In the Address field, enter the primary

IP address for the switch. Click OK.

The PC saves the configuration for the

OAI driver.

Aastra - 2489-005 33