User manual

IVC Card Features and Support
Parameter Function
No Digit Entered Step Defines a call guide step to which the system will
proceed if it does not collect digits for a call. This
parameter can specify either a step number, a step label,
or "Next." Next instructs the system to execute the call
guide step that immediately follows the End Get Digits
step.
Allowable Parameter Types
Fixed value, pre-defined constant, user-defined
constant, user-defined variable, system variable,
pre-defined function, label.
Invalid Digit Entered Step Defines a call guide step to which the system will
proceed if it collects invalid digits for a call. This
parameter can specify either a step number, a step label,
or "Next." Next instructs the system to execute the call
guide step that immediately follows the End Get Digits
step.
Allowable Parameter Types
Fixed value, pre-defined constant, user-defined
constant, user-defined variable, system variable,
pre-defined function, label.
Announcement Prompt
Interrupt
Enables or disables interruption of an announcement or
phrase in progress when the system receives a digit.
Allowable Parameter Types
Fixed value, pre-defined constant, user-defined
constant, user-defined variable, system variable,
pre-defined function.
End Get Digits Step
An End Get Digits (ENDG) call guide step indicates an end of a Get Digits process. A
Get Digits/End Get Digits block allows the system to group any of the following steps,
which may fall between a Get Digits and an End Get Digits step:
• Speak IVS Phrase
• Speak IVS Data
• If / Else / And If
• Announcement Pause
• Set
An End Get Digits step has no parameters.
M
M
Aastra - 2489-005 51