User manual

Chapter 8, IVS Support for CLASS Features

Create an IVC Card with an FSK Application

Use this procedure to create a new IVC card configuration that provides an FSK

application. An IVC card must have this configuration to support caller ID with name

and number delivery.

All of the ports on an IVC card with the FSK application must be assigned to the same

FSK group. Because an IVC card cannot support multiple applications, such as FSK and

MSFD, simultaneous support for Integrated Voice Services (IVS) and CLASS features

requires at least two IVC cards with different applications.

Step Action Result

1. At the main command prompt of an

Administrative Console, type CARD.

The console displays:

SELECT COMMAND => CARD

SELECT MODE: PRINT, DISPLAY,

UPDATE, MOVE =>

2. Type U. The console displays:

UPDT MODE: C-Create M-Modify

D-Delete P-Copy... =>

3. Type C. The console displays:

ENTER LOCATION or ?... =>

4. Type an IVC card location in the form

WWW.X.YY, where WWW is the cabinet

number,

X is the shelf number, and YY

is the slot number.

For example, type 1.3.14 if the IVC

card is in the 14th slot of the third shelf

in the first cabinet.

The console displays:

CARD TYPE or ?...=>

5. Type IVC. The console displays:

APPLICATION NAME or ?...=>

6. Type FSK (Frequency Shift Keying).

At subsequent prompts, enter

appropriate parameter values for the

IVC FSK card.

After you define all of the parameters

for the card, the console displays them,

followed by:

DOES UPDATE VERIFY =>

7. Type Y to save the IVC FSK card

configuration.

80 Aastra – 2489-005