User manual

IVC Card Features and Support
Enable Caller Identification on an STE Station
Use this procedure to enable the Caller ID function on any port for a Standard Telephone
Equipment (STE) phone station. This procedure modifies an existing port.
Step Action Result
1. At the main Administrative Console
prompt, type FONE.
The console displays:
SELECT COMMAND => FONE
SELECT MODE: PRINT, DISPLAY,
UPDATE =>
2. Type U. The console displays:
UPDT MODE: C-Create M-Modify
D-Delete... =>
3. Type M. The console displays:
ENTER PORT, LOCATION, WORK AT
HOME or ?... =>
4. Type an appropriate STE port number
in the form WWW.X.YY.ZZ, where
WWW it the cabinet number, X is the
shelf, YY is the slot, and ZZ is the port.
For example, 1.3.14.20 specifies the
20
th
port of an STE card in the14
th
slot
of the third shelf in the first cabinet.
The console displays:
PORT TYPE...STE
Specify ITE/STE Field to
Modify or - or ?... =>
5. Type CID. The console displays:
ANALOG CALLER ID Y=YES
N=NO... =>
6. Type Y. The console displays:
Specify ITE/STE Field to
Modify or - or ?... =>
7. Press the <Enter> key. The console displays the configuration
of the STE port, followed by:
DOES UPDATE VERIFY ? =>
8. Type Y. The system saves the port
configuration with Caller ID enabled.
M
M
Aastra - 2489-005 81