User manual

Chapter 10, Diagnostic Testing
Configure an IVC Card to Support Diagnostic Testing
Use this two-stage procedure to configure an IVC card to support diagnostic tests.
Stage Description
1
Establish a diagnostic group
2
Configure an IVC card as an IMSF card with an IDTI application
Establish a Diagnostic Group
To run diagnostic tests, you must create a diagnostic group for the switching partition
that contains the IVC card (and its ports).
Step Action Result
1. At the main Administrative Console
prompt, type GRPS.
The console displays:
SELECT COMMAND => GRPS
SELECT MODE: PRINT, DISPLAY,
UPDATE, TITLES, SEARCH =>
2. Type U. The console displays:
UPDT: C-Create, M-Modify,
D-Delete, P-Copy...=>
3. Type C. The console displays:
SPECIFY GROUP NUMBER:...=>
4. Type an appropriate group number.
The system will not accept a number
that is already assigned to an existing
group. For example, type 100 if that
number is available.
The console displays:
ENTER GROUP TYPE OR ?...=>
5. Type DGNG to specify "diagnostics"
as the group type.
The console displays:
ENTER TITLE:...=>
6. Type an appropriate group name, such
as diagnostics group.
The console displays:
ENTER SWITCHING PARTITION:
0-55...=>
M
M
86 Aastra – 2489-005