User manual

Select to turn on/off the password protect for BT and SAMBA.

Default user ID:admin Default password:123

If you select off login control, you can go to the BT and SAMBA

without input a password.

BT and

SAMBA

Select to turn on/off the BT and SAMBA.

System Update

More detail update method please see the Chapter 11.

And the system information is also displayed in this interface.

Time

System time setting.

Use the navigation key and number keys to set.

Parental

Control

Select whether to classify the grade of the movie or the setting of the

grade.

Default password: 0000

R/RW Auto-

Play

Automatic play of DVD.

Press up/down key to select and press the enter key for confirmation.

Angle Mark

During play back DVD files, you can select the different visual angles

to watch DVD. Press the Up/ Down keys to set the switches.

HDD Format

Select to format the built-in HDD.

After formatted the hard disk, the data saved on the hard disk will be

lost; so please operate carefully.

More detail please see the Chapter 8.4.1.

Restore

default

Select to restore factory defaults.

8.4.1 Format HDD

For users who wish to install a new SATA HDD into the player, please refer to the following

procedures to format the hard disk on the player before usage.

Access into Setup->System->HDD Format menu

Step 1: Select OK on the Warning page, press ok to confirm.

Step 2: Select Format, press ok, and then hard disk format will start.

The formatting procedure will be finished within a few minutes. And then you can use the hard

disk properly on the player.