User manual

Step 1: Ad-Hoc Setup
After AD HOC way is selected, press ok key to enter Ad-Hoc setting page.
Directly press Play key and the system will automatically carry out Ad-Hoc setting based
on the default setting.
Related settings:
a. Wireless SSID (name of wireless)
Use the Virtual keyboard to input.
b. Wireless Security (select whether it is Open System or whether use WEP password to
enter)
Use the Virtual keyboard to input.
c. Host IP
After the setting is finished, press Play key to enter system setting.
If the setting is successfully finished, the system will display the set result in Test Ok and
Show Net info interface. The information of Ad-Hoc is recorded here, such as SSID, safety
mode, IP address, subnet mask and preinstall gateway. Press ok key to complete the
setting.
If obtained the IP address failed, please return and try it again.
9.4.2.3 WPS AP
Connect wireless network card with the system and carry out the following operations.
After WPS (AP) way is selected, press ok key to enter setting page.
There are two connection ways: PBC(Push button) or PIN(PIN code).